Walking Zombie Machine

by cardboard guy in Living > Toys & Games

1869 Views, 13 Favorites, 0 Comments

Walking Zombie Machine

Materials

1.scissors 2.small cardboard box 3.piece of cardboard 4.crudely drawn zombie 5. about 1 foot of wood dowel 6.tape 7.hot glue gun (optional)

Cut Holes

cut small holes about half way dow the side of the box and reenforce the holes with tape

More Cutting

cut out a square about 2 inches then poke a hole in the middle.

Wrapping the Square

wrap the long cardboard piece around the square.

Putting It on the Dowel

put the square on the dowel about halfway down it. then tape/hot glue it on

Put in In the Box

put the ends of the dowel in the holes.

Add a Handle

make a handle out of dowel and cardboard the stick it onto the end of the other dowel.

Make This

make that out of cardboard. make sure the holes are big

Cut That Out

cut for of these out

The Moving Parts

cut 2 wood dowels to be 1inch or less then stick in into one of the holes then stick the cardboard on

Tape It In

tape it into the box so lt lays on the square

The Zombie

cut out the zombie picture then cut of the arms. put the arms onto a dowel.

Its All Coming Together

put the ARMS onto the moving rectangle. put the REST OF THE ZOMBIE on a new stand

DONE!

move the handle to make the zombies arms move thanks for reading if you liked it vote for it! heres the video: http://youtu.be/XXFHlS9J0vI