Robot Egg Cup

by sir woodster in Design > Art

948 Views, 1 Favorites, 0 Comments

Robot Egg Cup

in this instructable i am going to make a robot egg cup .it looks cool and kids love it .

What You Will Need

parts i used :

PVC pipe (pic 2 )

peaces from a meccano set

elastic cord

tools :

small screwdriver

wrench (size that fit the nuts)

hole making tool or drill

hot glue gun

YOUR IMAGINATION

The Feeds

i started by marking where to drill the holes , than i drilled the holes a bit smaller than the bold`s i was using.

for the feeds i used metal meccano parts (pic.3)

if the hole is a bit smaller the bold should tread itself .

The Grab Machine Arm

the right arm of the robot was inspired by those impossible grab machines .

to start i bolted 3 L peaces on a long bold (pic.1 and 2)

than i added a pen spring to cover the open space between the 2 nuts (pic.3)

at last i added a last L peace and another nut, i bolted it on the PVC pipe in the same way as i did on the feeds

The Rocket Launcher Arm

the left arm is inspired by a rocket launcher .

i found a metal tube peace and glued a rubber washer in the inside.

than i made a hole in the PVC and bolted the rocket launcher on the robot

Cook the Egg

put some water in a pan and put the pan on a hot stove.

than trow in the egg ,when the water is boiling you wait about 10 min. before the egg is fully boiled

The Eye

you can draw an eye on the egg but i decided to take it 1 step further by making an eye that straps around the egg.

i used some elastic cord to rap around the egg .

for the eye i used a wheel from the meccano set ,

i measured how long the cord should be and Stapled the cord together than i glued the cor on the wheel and there you go you have an eye for an egg .