Chopstick Coaster
materials and tools needed
-lots of chopsticks
-glue(hot glue)
-knife(my gerber)
-marker (for white board)
-cutters(any cutter that is strong)
-white board(not required,i used it to plan stuff out)
-lots of chopsticks
-glue(hot glue)
-knife(my gerber)
-marker (for white board)
-cutters(any cutter that is strong)
-white board(not required,i used it to plan stuff out)
Preparation
start by splitting the chopsticks in half
Planning
start by planning what the shape and size will be.
I'm making the shape an octagon so its almost a circle
plus it doesn't take up a lot of space like a square
I'm making the shape an octagon so its almost a circle
plus it doesn't take up a lot of space like a square
Making It
i cut the chopsticks into 8 pieces.
each pieces is 1.5 inches long.
then i made it into an octagon and glue it together
each pieces is 1.5 inches long.
then i made it into an octagon and glue it together
Making
then start to add on to the frame
i cut the half chopsticks so they can fit the length and glue to the frame
i cut the half chopsticks so they can fit the length and glue to the frame
Repeat
finally add another frame to the other side so that each side are the same
Optional
i added a piece of cardboard to the flat side side so that it act as a cushion when set on a table