Wooden Stackable Storage Box | Laser Cut,Wood

by alexphipps696 in Workshop > Laser Cutting

2084 Views, 15 Favorites, 0 Comments

Wooden Stackable Storage Box | Laser Cut,Wood

A clean, sturdy storage box made from laser-cut plywood with finger joints—no fancy tools needed. Perfect for desk items, jewelry, or small gifts.

Supplies

Materials:

  1. 3mm thickness plywood (40*60cm)
  2. Wood glue

Equipment:

  1. 20W NEJE Laser Cutter
  2. Software: Lightburn

Upload the File

Place your plywood flat on the laser bed. Import your SVG file into your laser software.

Cutting:

  1. Power: 80–90 %
  2. Speed: 400-450 mm/min
  3. One pass

Downloads

Assembly

Sand the entire box smooth. Then align the clips and insert the clips, then secure with wood glue.

Enjoy Your Work!

Your box is done! You can apply stain, paint, or clear varnish for protection and beauty. And you can cut more boxes and use them as stackable storage box.