Wooden Animals
this is a super easy and fun projects to make! almost no tools and materials needed and you can fully customize it to whatever you want. it can be used as toys for children or as decoration.
Supplies
tools
- clamps
- jigsaw
- printer
- dremel + sandbit
materials
- paper (for the printer)
- scissor
- adhesive glue
- sandpaper
- paint brushes
- paint (color depends)
wood
- any - light color and 2cm thick
Design
the first step is to design and print whatever you want. if you want you can also draw directly onto the wood but i easily change my mind, so i first draw on the computer the design and want and print it out. i have a few designs that i absolutely so those are in the attachment.
Glue
cut out your design can be very rough, because you will be cutting it. put some spray adhesive on your paper and put it on the wood. hold your paper at arms length so there isn't to much glue. this can cause that it wont stick to the wood
Cutting and Sanding
hold down your wood with a clamp, and cut out your design with a jigsaw. sanding takes a while if you want to get it really smooth, but it's really important! sand the edges you can get to easily with a dremel with an sanding attachment, for the places the dremel cant reach
Bare
after you sanded the piece there are multiple thing you can to, one of them is to just keep it bare, for the hedgehog in the first picture i found it best to keep it bare.
Paint
an other idea is to just paint it. it makes it more pop, especially for trees, or if you want it to look more cartonish. if you want it to use it as a toy please use safe paint!
Paint + Water
if you mix water and paint you can get a sort of varnish. if you use this you can still chose the color, but you will see the wood grain through it.
Finish
and your done! this is an incredibly easy project, but the fun thing is that you can literally make any design you want. also if you have little kids you can cut the pieces out yourself and the kids can paint it!