Week 2 - Press Fit Pieces

by XuperBryan in Workshop > Laser Cutting

201 Views, 2 Favorites, 0 Comments

Week 2 - Press Fit Pieces

Goal: Create a press fit mating joint between two pieces

Create Heart Outline

First, I looked up an easy way to create a heart. I found that creating a square with two circles was a good way to make a nice and well formed heart, so I started with that.

Separate Heart Into Two Halves

Next, I separated the heart into two halves by trimming all of the edges that I did not want. I then created construction lines and re-drew two hearts so that they were apart from each other. This way, I could more easily add the wedges to the solid.

Add Notches to Heart Sketch

Afterwards, I added some wedges to form the press fit sides.

Extrude Heart Notches

Lastly, I extruded the edges, which completes my initial run of the digital design.

Laser Cutting

After exporting to illustrator and preparing the file for the laser cutter, I was pleasantly surprised that the design worked on the first try! The default trim of 0.15mm worked well, and I am happy with the results of this project