Water Machine With Button
by ExpertBuilder in Circuits > Electronics
413 Views, 5 Favorites, 0 Comments
Water Machine With Button
Ever wanted to have a quick sip of water, without having to walk to the fridge? This water machine can fit almost medium cups. It runs on a two AA battery’s.
Supplies
Cardboard or any material, air motor, water bottle, tubes, two AA battery holder, push button, wires, and black sticky phone.
Make the Circuit
Connect the button, air motor, and battery. Test it. If it works it is good.
Making the Base
Cut two pieces like the photo. Measure the cup. Make a place for the button and the battery. Then glue them in. Make sure there is a place for the air motor.
Make the Bottle
Make two holes for the tubes. Then attach one to the air motor. Then, make a hole in the top. Put the last tube in the hole in the top.
Testing
Fill the bottle, and turn the machine on. Put a cup underneath the tube. Push the button, then water will come down.
Congrats! You just made a water machine!
Congrats! You just made a water machine!