Vibrobot

by thunder_ir in Circuits > Robots

2875 Views, 13 Favorites, 0 Comments

Vibrobot

This is a very simple Robot. Vibrobot is an extremely simple form of walking robot. It is one of the simplest of all mobile robots, both in its function and its construction.

Materials:

  • computer fan
  • paper clips
  • hot glue
  • switch (rock switch)
  • Wires
  • hard wire
  • galvanized plate (about 3 x 5 cm)
  • red LED
  • 1K ohm resistor
  • glue cap (or other cap)

Downloads

Eyes

Solder two LEDs and resistor like schematic and photos.

Neck

form a hard wire like pic for neck

use a glue cap (or similar) and glue to wire for face

glue LEDs to cap

cut a wire strip and cover the hard wire

Vibrator

use a 12v computer fan as a vibrator

glue a screw (or two screws) to fan blade

Legs

use 6 paper clips and straighten them and form like pics

solder legs to galvanized plate

solder a rock switch to galvanized plate

Soldering

solder LEDs(eyes), Fan, Switch and battery together like picture and schematic

Finishing

complete the robot as you like