Vernier Caliper

by MehdiYousufi in Workshop > Laser Cutting

3078 Views, 17 Favorites, 0 Comments

Vernier Caliper

It's a cheap vernier caliper for home use.

Don't worry it's exact. (:

What we need :

MDF 3.0 mm sheet. about 30×20 cm

(2) M3 × 6 mm bolts

(4) M3 × 9 mm bolts

(6) M3 nuts

Edit Print File

You can download .dxf file and add numbers.

Sorry I don't know how can I do it in Solidworks. |:

Notice : It has two veriner if you want to use both vernier at the same time should edit file.

Glue the Nuts in Holes

Assembly

I hope picture is clear enough.

Calibrate

Tight the screws but not very tighten.

Close caliper jaws and set zero line of verniers in the front of zero line of ruler.

Tight the screws. (:

It's ready. enjoy!