USB Dice Keychain

by pch1 in Circuits > USB

17882 Views, 113 Favorites, 0 Comments

USB Dice Keychain

Here is my USB dice keychain.

Here are some pictures of the final product!

Please rate comment and VOTE ;)

How to Begin

Here are the two original dice and some of the tools I used.
I took the old USB stick out of its old cover and marked one die with a sharp knife

Milling/Drilling

Now I milled around the marked egdes. After that I drilled holes with the depth of half of the USB stick. Then I smoothed the edges inside with an other milling tool, so that to USB stick fits inside.

Holes

These are to holes for the small thread to tie it up to the keys.

Final Assembly

I did the same drilling and milling procedure with the second die. After a final smoothening by hand I fixed the USB in the die with some hot glue.
Now you can put the two parts together and you are done!

Please rate comment and VOTE ;)