USB LED Nightlight/lantern

In this instructable, I will show you how to make a USB lantern.
You will need:
A USB cable
 2 LEDs
a double fudge brownie
a container
a switch
a soldering iron, and  now, you're set!

PLEASE BE VERY CAREFUL USING SOLDERING!  If you already know anything about electronics go ahead and skip this step.  So if you're an newbie this is a great project. 

For a container I recommend a tupperware or something else that's plastic.  Carefully use a knife, scissors, or a box cutter to cut holes for the wire and switch.

Now your finished!  If you have any suggestions please comment and vote of instructable!