Torii Gate Picture Frame

by GG Wood Work in Workshop > Woodworking

2382 Views, 15 Favorites, 0 Comments

Torii Gate Picture Frame

I hope you like it.

Please leave a like, share & comment. And subscribe for more like this!

Check out the Video & other projects - https://www.youtube.com/channel/UCRMjvilGRdZxHqr3...

Follow my work on Instagram -

Help me make more projects-

OR

One time tip -

Thanks

GG

Rip a Pallet Stretcher

I started with a pallet stretcher that had some interesting grain / spalting in, then ripped it down the middle and chose the best side.

Find a Contrasting Wood and Cut Out Pieces

Once i had my pieces lay out on the pallet wood i found a old drawer that was a darker wood, and used this to lay out the leg pieces.

Pieces for the Frame

One i had cut out the pieces i had 2 leg pieces if the dark wood.

One piece of pallet wood and then a longer piece of pallet wood to be the top.

Make Recess for the Glass & Picture

Next i marked out where the glass and then picture would fit.

I marked a few cm from the bottom and top so the glass would be held in position and cut away slowly until i had a tight friction fit.

Through Tenon in Legs

Next i lay out the position for the piece that would basically act as a stretcher.

And again cut away slowly until i had a tight fit.

It helped to keep the glass in place while marking up so everything would end up in the right position.

Glue Up

Next was the glue up, as it was a awkward shape to clamp i opted for super glue.

I started by glueing in the "stretcher piece"

Then added a decorative middle and a thin square on top of the legs.

Then the longer piece as the top.

Sand & Finish

My plane left a decent finish so i started at 240 grit and ended at 500.

Then applied a clear gloss coat sanding at 500 in between coats.

Add Picture

All that was left was to add the glass, picture and backer (all of which i used from a bought frame)

The frame is designed to hold a 4x6 photo but can be scaled to hold pretty much anything.

The overall height is around 8" and 10" length with a 3/4" width.

Although i haven't used the traditional joinery (mainly due to the size) i love how its turned out and its something ive wanted to try for ages now.

Let me know what you think!

I hope you guys and girls like it.


Please leave a like, share & comment. And subscribe for more like this!

Check out the Video & other projects - https://www.youtube.com/channel/UCRMjvilGRdZxHqr3...

Follow my work on Instagram -

Help me make more projects-

OR

One time tip -

Thanks

GG