Tool Box

by augustus conner in Workshop > Woodworking

95 Views, 0 Favorites, 0 Comments

Tool Box

This is wooden toolbox you can use to hold whatever you need.


Supplies

wooden boards

.75 inch thick 2.5-inch-tall boards

circular saw

wood glue

0.13 in thick wood

band saw

Cut Out Side Peices

use the circular saw or band saw to cut the .75 inch thick 2.5-inch-tall boards into 2 5inch long pieces and 2 7inch long pieces

Angled Cuts

use the circular saw or band saw cut a 45-degree angle cut into each side of each board

Make Handle and Base

use the band saw to cut the 0.13 inch thick wood 5.7 inch long and 3.7 inches wide

cut out the handle piece following the blueprints above with the band saw


Side Slots

take the side pieces cut in step 1 and angled in step 2 and use the band saw to cut 0.1 inch slots into the sides following the blueprints above.

Put Everything Together

use the wood glue to put all the pieces together