Tiny Screwdriver

by ThatKnottyguy in Workshop > Tools

17133 Views, 6 Favorites, 0 Comments

Tiny Screwdriver

Ever needed a mini screwdriver?
No? Me either! But It was fun to make!
If you are intrigued, read on!

Materials

What you will need
  • Wooden dowel- your choice of size
  • Sandpaper
  • 18 Gauge wire
  • Hammer
  • Anvil -or- as I use, a mallet
  • Drill with small bit
  • Hot Glue gun
  • Saw
  • Common sense

WoodWorking

First, Take your dowel and cut off about 1/2 inch off of the end.
Then sand the tops until they are smooth.
Sand the sides so it is still a circle but thinner.

Almost Done

Now, cut the wire size to your liking.
Make sure there's room for the drilled part.
Now drill a hole, almost all the way through.
Then hot glue it into the hole.
Flatten one side of the wire

Done!!

Now, use that sucker somehow!
Paint if wanted