Throwing Pipe

The throwing pipe is like a throwing knife only it is made out of pipe. Here's how to make one.

You will need: A pipe at least 3 inches long A hacksaw A file Optional: A weight and hotglue A vice A saw guide

Measure the pipe in your hand and see what feels like a good length. The cut the pipe there. You can add a little design to this part. This will not be the point of the pipe.

File the edges so they are not so sharp.

Now it is time to cut the tip. Cut the tip at a 45 degree angle or less.

File the tip to be as sharp as possible.

You can file the handle or add a wrap. I added weight to the front of the pipe. I took three of the biggest fishing weights I could find and hotglued them inside the tip of the pipe. Then I spray painted the tip red.