The Lego Catapult

by jarvis lee in Design > Architecture

34 Views, 0 Favorites, 0 Comments

The Lego Catapult

The Lego Catapult is a catapult that catapults (shoots) an aluminium ball which can fit in the basket of the catapult. The Lego Catapult is made of lego and uses rubber bands to catapult the aluminium ball very far. The block in the middle of the Lego Catapult must be supported or else the catapult will collapse when it catapults. Do not push the basket all the way down or the catapult will break when it catapults as the catapult may catapult (toast) the basket along with the aluminium ball. :3

Supplies

To build the catapult, you will need to have these materials:

Lego Bricks (Required)

Rubber bands (Required)

Tape (Optional)

Building the Base

To build the Lego Catapult, you will need to build the base of the catapult. The base of the catapult should be 8x20. Add some blocks from under to support the base :P

Adding the Pivot

For your catapult to rotate in place, a pivot will be required. To build the pivot, TWO Lego bricks that are 4x1 will be placed at both ends of the base as shown in the image above. Place TWO Lego technic pieces (The lego brick with holes in it) that are 4x1 on top of the regular Lego bricks. Add TWO Lego technic axle arms onto the pivot. (This is so that the lever can be attached to it in Step 4)

Adding the Lever

The next step is making the lever. To make it, attach Lego Bricks until it is 14x2. Then attach a Lego technic piece (The lego brick with holes in it) to the lever similarly to what is shown in the images. Then add 2 Lego technic pieces (The lego piece that looks like a stick :3). Leave a gap under the strip; this will be important after the next few steps!

Combine the Base and Lever

The lever and the base must be attached. Attach the lever to the pivot, and seal it off with Lego pieces on either side of the base. This will make way for your functioning Lego Catapult :P

Adding Supports

For the Lego Catapult to be able to function, it should have a block that the rubber band is attached to. Add TWO cylinder lego bricks onto the base and surround it with many lego bricks until only the top just pokes out. Add a rubber band and close the top with more lego bricks.

Making and Adding the Basket

For the catapult to be able to shoot, it must be able to hold the aluminium ball. Create a basket using lego bricks by creating a base of 6x6 and add lego bricks to all sides of the basket. Attach the basket to the end of the lever.

Attaching the Rubber Band

Attach the rubber band from the block to the lever and close the rubber band in using lego bricks similarly to how it is shown in the images so that the rubber band does not slip off the lever. This will help when you want to launch your catapult!

Add Tape (optional)

Tape can be added to the design to make it more durable, but it is optional.

Completed!

Congratulations, the Lego Catapult has been created! You can decorate your Lego Catapult for it to look better if you like, but it is already able to function. To use your Lego Catapult, place an aluminium ball in the basket and push down the lever. Let go of the lever, and watch the aluminium ball fly... :D