Table Light

by Eiqua2808 in Workshop > Lighting

1765 Views, 49 Favorites, 0 Comments

Table Light

So here is an instructable for a great nighttable light. It's easy to make, I use it often and I think you will like it.

Size

You need 4 woodboards which are 20 cm, 7 cm, 0,5cm long.
You also need one woodboard which is 12 cm, 12cm, 1,5cm for the bottom.
4 sticks 4 cm, 0,5cm, 0,5cm
8 very tiny woodblocks
and a light!!!.

Sketching

This is the pattern for the sides, first you have to make a sketch.

Copying

Now you have to copy the sketch and you have to glue it on the woodboards so you can saw better.

Sawing

You have to saw the woodboards very carefully.!!!!!

Stecking Together

If all sides fit together, you can wrap off the paper.

Glueing

Now you can glue the pieces together, but be careful:-)

Grinding

Now all the paper must be grinded off.

Glueing 2.0

Now glue one stick in each corner, to hold the board with the light bulb.

Electronics

Now make a hole in a woodboard and fix the electric part with the light bulb on it. The light bulb has to match perfect in the piece of wood.

Glueing 3.0

Now you have to glue 2 tiny woodblocks in each corner.

The Cable

Make a rekruiment were the cable matches into and glue it to the bottom.

Holes

You need different sizes of drills. Make as many holes as you want.

Beautying

Now make everything beauty, than you are finished.

Finish

You made it! You are finished.If you have any questions please write a comment:-)