Survival Knife

by mandamados in Workshop > Knives

4793 Views, 59 Favorites, 0 Comments

Survival Knife

My first knife !!!

Shape of the Knife

I used Uddeholm Arne tool steel, 6mm thick

Drilling

Drilling

Cutting the Blade

Cut the blade with an angle grinder

Finishing the Blade

Finish the blade with a twin grinder

Decorate the Knife

Decorate the knife

Final Shape

The final shape of the knife

Hardening and Tempering the Steel

Heat the metal to a medium-high orange heat, until the steel becomes non-magnetic. Just tap it against the magnet while it's glowing, and if it doesn't stick, it's ready, plunge it into the oil bath. After that, temper the knife in a preheated oven for 1 hour at 220 celsius

Paracord Knife Wrap

Use a paracord for handle

Acid Etch Metal