Steampunk Bug Monstrance
Making a steampunk artifact using 3D-printing, woodworking and Arduino. A bug in a block of resin is lit with five LEDs of different color which makes it seem "alive". The LEDs are flashed on and off and then pause for 30 seconds. The waiting time can be adjusted in the Arduino sketch.
Supplies
Materials:
5 mm LEDs, different colors (5)
red led with collar
resistors 220 ohm (6)
resin block with bug 41 x 24 x 74 mm
on-off switch
Arduino uno
Power supply 12V
12V power connector
9 mm plywood
fancy profiled wood strip (0.6 m)
cardboard
green felt
Dupont connector wires
brass screws (8)
Parker screw M2.2 5 and 12 mm long (several)
Parker screw M3 10 mm long (2)
Fork connector (2)
Wood glue
Wood stain
Varnish
Machines:
3D printer
SketchUp
Woodworking equipment
Soldering station
Drill
Tools
crimptool
For Building Process See Video
The video is mostly self explanatory.
Additional information:
You could use a 5V USB-C power supply as the circuit uses only 5V.
Adjust the dimensions of LED-houder part to your resin block.