Spume Lamp

by NinaG29 in Circuits > LEDs

945 Views, 0 Favorites, 0 Comments

Spume Lamp

Sturdy. Sustainable. Spume.

Sketch

​Cut Cardboard

Cut cardboard & score in the middle.

Cut Foam

Cut foam to glue on top of the cardboard.

Bend Foam Into Place

Bend on the perforated lines and glue into place.

Tube Stand

Slip wire into PVC tube.

Foam Stand

Roll PVC and wire tube in the blue sponge foam and hand stitch into place.

Cut Wood

Cut the bottom off of a piece of found wood.

Cut a U shape.

Remove the positive so you are left with the hollow U.

Sand and Glue

Clamp the top and bottom pieces together and glue.

Glue the middle piece in place.

Assemble All the Parts Together

Place the foam stand into the wood.

Sew the lamp shade in between the foam stand.

Voila! You now have a Spume lamp.