Spring Powered Bazooka
by M4 Sherman tank in Outside > Survival
2400 Views, 18 Favorites, 0 Comments
Spring Powered Bazooka
This is a very simple Spring powered bazooka, it is still being modified and upgraded. with a little creativity you could add a(n)
- pull trigger
- optical sight
- "iron"sights
- and a range finder.
This is the Mark-3 version and holds two large springs.
The Mark-2 had 1 large spring.
And the Mark-1 Had 1 small spring.
But that enough history, lets build it!
Materials for the Mark-3-
- 1 1'9'' of 1 1/4'' PVC
- 2 (1 is spare) 1 1/4'' PVC end cap
- _ 3/4'' PVC end cap (AMMO)
- 2 #51 Size Springs
- 1 Small Cotter Pin
- 1 Key Ring (!One you can fit your finger in!)
- 1 1'9'' dowel (Has to fit in springs)
Tools
- Drill
- Saw
- Knife
- Tape Measure
Make Sure You Have All the Parts
Listed previously.
Drill Your Hole 8 3/4'' From One End of the Pipe
Drill a Hole in the End of the 1 1/4'' End Cap
Put the Cotter Pin on the Key Ring
Put the Pull Pin in the Hole
Put the Springs on the Dowel
Load Small Cap in Barrel
The cap is outside the barrel for demonstration purposes.
Load Spring Assembly Into the Barrel
The spring assembly is outside the barrel for demonstration purposes.
And Push the Dowel Though the End Cap and Onto the Tube
The Bazooka Is Now Loaded. Pull the Pin to Fire!
NOTE: it should look like this.