South Elementary Rover

by MichaelA527 in Teachers > 5

236 Views, 0 Favorites, 0 Comments

South Elementary Rover

We originally wanted to create a remote control robot to introduce the younger grades to the power of coding, but we took it further.

Supplies

We used Lego Mindstorms, Scratch, and some cups for the course.

Building the Rover

We built the Rover with tracks and wheels to be used on different floor surfaces.During the building of  this project we had many challenges. For example, at the start of this project we had the challenge of figuring out how we were going to build this thing but as the project went on we figured out that many parts of our design were flawed, for example our first prototype was too heavy and had horrible integrity.

Coding the Rover

Coding was a very difficult part. We had to make everything go down to the millisecond Also we coded in Scratch which was difficult because we were coding with very few blocks and we could only control the motors not the other features. Also, getting Scratch to work with coding the motors was also very hard.    


At the beginning our design was flawed because we had horrible wheels our design was too heavy, it had problems with friction and it was a poor design as we went on we saw these problems popping up we realized we needed to fix these things and make a better design and so far we have replaced the wheels with treads and we built a structure to hold more weight and as we are writing 

We are building a claw. We also are coding it to so you can use w a s d and probably the arrows too


Testing the Rover

So the reason we built the maze was to test maneuverability and to see what we needed to do.