Simple Pocket Torch

by r5sb in Circuits > LEDs

2125 Views, 24 Favorites, 0 Comments

Simple Pocket Torch

List of Parts Required :-

9V Battery
LED
Small PCB
Push button Switch
1K Resistor
Rubber Band

Tools :-
Soldering Iron
Solder

Connections

The connections are very simple and requires very little soldering.

Final Assembly

Tape or stick a small piece of cardboard over the battery surface so that the bottom of the PCB doesn't touch the battery. Secure the PCB on the battery with a rubber band.
Your pocket torch is now done.
Note:- Another LED be easily soldered by connecting its anode to the cathode of the first LED and its cathode to the -ve of the battery.