Segway Ikea Hack

by zpsajk in Workshop > Electric Vehicles

2107 Views, 4 Favorites, 0 Comments

Segway Ikea Hack

How to make a sitway in an hour

Supplies

Segway ninebot S

Ikea stool Marius

3 feet wood 1x1 1/2” or larger

Cut 2 Pieces 18” Length

Then mark two points for drilling 10” apart

Drill

Use a 4/5” drill to make 2 holes halfway through each member

Cut a Smooth Curve

This is optional, but I like to have the look of a rocking chair at the front

Mount

Simply enter each leg of the stool into the holes, and you are done.

There is tension to be compressed, which will also keep the wood to cling to the legs when lifted

Ride

Switch on the Segway and install the stool with the front legs at the front edge so you can reach the steering lever between your legs, and be seated