SR04 Ultrasonic Sensor Case

by Sergio Ghirardelli in Workshop > 3D Printing

3090 Views, 1 Favorites, 0 Comments

SR04 Ultrasonic Sensor Case

The SR04 ultrasonic sensor is a very popular sensor among makers all over the world.

It is a sensor that allows you to measure how far away an object is.

For example, I used it in the Green Detect wireless sensor network platform to measure the height of a river and thus prevent a flood.

( https://youtube.com/shorts/PEsfu_AiJ0E?feature=share )

With this project I wanted to make a case to be able to use the sensor in outdoor projects and therefore protect it from dust and humidity.

I think this simple instructable can be very helpful for all of you, hope you like it!

Supplies

Print SR04 Case

SR04 3D Case is composed by 2 parts: the box and the cover...print it.

Fix Cable and Gland to the Case Hole

Fix the cable gland and pass the cable that will connect to the sensor inside it

Fix SR04 Sensor to the Cover

SR04 sensor must be fixed to the cover using hot glue.

Connect the Sensor

Connect the wires to the sensor.

I suggest you to improve the fastening of the connection with hot glue

Close the Box

Fix the cover with 4 small self-tapping screws

Ready to Use!

The sensor is ready for use.

The 2 holes on the sides of the box allow you to fix the sensor wherever you want!