SMART LAMP PROJECT

by alejoblanco0123 in Workshop > 3D Printing

227 Views, 0 Favorites, 0 Comments

SMART LAMP PROJECT

Hello! We are students of the Escuela Tecnica Roberto Rocca and this year we made an intelligent lamp that is managed by an electronic circuit.

This was the model we used as a guide to make our lamp.

Supplies

The materials we used to make the lamp were:

  • cardboard

From the electronic part we used:

  • 7 green leds
  • 2 servomotors
  • 1 switch
  • 1 arduino UNO
  • 2 potentiometers 10K ohms
  • wires


Project Objectives

Throughout the project we had objectives to achieve

  1. Being able to make a lamp made by us​
  2. Make the lamp be controlled by a remote control​
  3. Be able to explain the step by step of the construction of the lamp​
  4. Be able to use Spanish and English to explain the project​ 

We have been able to meet all the objectives except number 2 due to a lack of resources.

Component Datasheet

Components

reverse motor

leds

batteries

Sketches, Assembly Sequence and Table of Components

lamp sketches

Code Simulation

code for the lamp to work

Sketch and Rapid Prototypes

Programming

text programming for arduino

3D Modeling (in ONSHAPE)

Assembly

arduino assembly for lamp

Manufacturing Plans

Functional Prototype of the Lamp