Robotic Line Follow Robot

by makedmodeer in Circuits > Robots

259 Views, 0 Favorites, 0 Comments

Robotic Line Follow Robot

i wanted to create this project to follow an line and then i could put an bin on top of it and it could go around and collect rubbish when i have gests over

Supplies

supplies


hot glue gun

soldering iron

screw drivers

wire in diffrent collures

moter controller

2 moters dc https://amzn.eu/d/hAGeaVi

3d printer + filliment

wire cutters

wire stripper

pi peco

programing skills

tracking sensors https://amzn.eu/d/4sywABF

ball castors https://amzn.eu/d/7JQk8Um

Printing the Body

print the main body and the nose cone

Gluing the Parts Together

i used hot glue to glue it together then i used an old soldering iron and filiment to bond the prints and fixed up any prinnting errors

Installing Sensors

i used some bolts and an alon key to secusre the sensors in place 2 link in supplyies

Insinstalling the Ball Castor

i used hot glue to install it i had to cut it down an little bit

Installing Moters

printing and gluing the moter blocks to the moters

Soldering the Wire to the Moters

first get the wire cut to length of what you need then cut 4 2 for each moter i used the wire stripper to strip the end of the wire then soldered it and tined it

Wire

putting the wire thrugh the slot

Wires

first i striped back an old usb cable then i wired in the moter cables posive and negotive then i conected the singil cables to the pi peco and then coded it i used chat gpt and i did not post code due to you migt want the robot to do more that i wanted for full costibility