Ripple

by melonaabar in Design > 3D Design

831 Views, 1 Favorites, 0 Comments

Ripple

Ripple is a mood lamp created with 3D printed and lasercut parts inspired by the flow of water in a river including the feeling that was evoked when walking past the river. This design is intended to be a mood lamp on someone’s desk or nightstand that can be turned on while someone is reading or getting ready for bed.

My first version of this lamp used a smart light bulb allowing me to change the color of the lamp from an app while the second version used Arduino and and RBG LED. The second iteration of this lamp can also stay on for specific periods of time and change colors by customizing the Arduino program to your preferences.

Supplies

For my first version of the lamp I used:

  1. PLA filament
  2. Lasercut wood
  3. Tin foil
  4. Tracing paper
  5. Linkind Smart Light Bulb A19

For the second version with Arduino I used:

  1. PLA filament
  2. Tin foil
  3. Printer paper
  4. Arduino UNO
  5. Resistors
  6. RGB LED
  7. Jumper wires
  8. Button

Softwares:

  1. Rhino 7
  2. Onshape

Tools:

  1. Glowforge Lasercut Machine
  2. Prusa Mini
  3. TinkerCad

Starting Design Process/finding Inspo

These are sketches/early drawings of my lamp. My first idea was to make a cylindrical lamp but quickly realized that making it would be too difficult given the amount of time. So I shifted to a hexagonal lamp which made designing the lamp elements easier. At this point of the process I tried in accommodate for the space that the cable to my lamp would require in order to pass through the lamp.

Modeling Pieces to 3D Print

I was testing different ways to achieve the wave design until I reached my final design that was 3D printed 72 times. I also made mock-models of the lamp base to test parts I had already created and different variations of the posts that would hold up the 3D printed parts.


In Onshape, I 3D modeled all of the parts to make sure they would all fit together. The "wave" pieces are 3 cosine waves that I modeled using offset ellipses and I designed the back of the "wave" so that it would lock into the posts easily. I also made sure to cut the ends of the "waves" at a 60° angle so the waves could create a hexagon instead of a box. The posts were modeled so they could all hold the "waves" and go all the way through the wood base so they would keep the whole lamp together.

Modeling Pieces to Lazercut

I wanted to lasercut the base of the lamp because I wanted to get some practice in Rhino. The image above is a Rhino model that was laser cut on ⅛ inch plywood to be used as the base of the lamp. You may have noticed the lonely hexagon piece in the Rhino design on the very left and it's meant to keep the poles stable from the top almost sandwiching them into place.

Designing Arduino Program

The past few steps, I've been explaining how I made the original lamp. However, for a final school project, I decided to create this lamp again but with Arduino UNO.

Prior to this project, I had little knowledge in Arduino so learning how to use it was a challenge since I had online tutorials to learn from. After learning how it worked, I spent at least 2 weeks writing the program going through many different iterations since I wanted the lamp to turn on for specific amount of time based on how many times you press the button.

Something I really struggled with was using the millis() function. Initially, I used a function that paused the whole program which is what I didn't want because I wanted the user to interrupt a time setting if they wanted to change the setting or turn it off. Because of this, I switched. to millis() which acts more like a timer compared to the other function.

When I finished the program, if you pressed the button once then it would run for 1 second and it would increase by fives until you've pressed it the fourth time in which the lamp turns off. This program is customizable to the user's preferences wether it's longer times or different colors by changing the program.

Redesigning Lamp Base

For my final at school, I was limited by my 3D printer's size so I had to scale down the model so that it would fit on my 3D printer and hold the Arduino board in the base. In the first image, the dark blue part held the Arduino board and wires and the light blue part was a stand for the LED so that it would be centered in the lamp. The grey piece was designed in order to hold the blue pieces together acting as a shell.

When assembling to circuit, I noticed the button I was using wasn't reliable and would cause the lamp to blackout. To fix this issue, I designed a casing for the button and the jumper wires so they could stay together.

Assembly

To assemble the lamp I first assembled the base, in the first lamp I glued together the lasercut pieces and in the second one, I glue together the 3D printed parts including the posts. Then glued the posts down and taped on tracing paper to the inside of the posts so the paper could dim the light. Finally I glued on the 72 waves and added the cap on the top with tin foil to reflect the light to the middle.

The video is the finished 2nd iteration of the lamp and the third image is the finished first iteration.