Reuse Old Bullet Shells As Valve Stem Covers

by backflip11 in Workshop > Metalworking

6715 Views, 23 Favorites, 0 Comments

Reuse Old Bullet Shells As Valve Stem Covers

Use old 30. Cal bullets to make tire valve cover

Gather Materials

Two 30. Cal shells Pipe cutters Drill Sand paper Plyers

Sand Shells

Sand them with 400 grit paper to shine them up a bit

Cut Shells

Cut the shell in half to get it the right size

Remove Burr

Take a drill and drill the burr almost out leave enough to screw on

Install

Just put on like regular and have fun