Reading Easel

by DuqARTLab in Circuits > Assistive Tech

638 Views, 0 Favorites, 0 Comments

Reading Easel


I learned to do cardboard carpentry at the Adaptive Design Association.

Supplies

Tools

Awl

Cardboard Knife

Mallet

T-Square


Materials

Tri-Wall Cardboard

Wooden "Nails"

White Glue

Measure and Cut Parts for Front Piece

The direction of the cardboard's grain does not matter for these cuts

Assemble Front Piece

1. Punch holes for nails

2. Join pieces with white glue

3. Put glue in nail holes

4. Put nails in holes

Measure and Cut Side Pieces

The direction of the cardboard grain doesn't matter for these cuts

Measure and Cut Back Piece

The direction of the cardboard grain doesn't matter for this cut

Attach Side Pieces

1. Punch holes for nails

2. Join side pieces to front piece with white glue

3. Put glue in nail holes

4. Put nails in holes

Attach Back Piece

1. Punch holes for nails

2. Join back piece to side pieces with white glue

3. Put glue in nail holes

4. Put nails in holes

Measure and Cut Bottom Piece

The direction of the cardboard grain doesn't matter for this cut

Attach Bottom Piece

1. Punch holes for nails

2. Join bottom piece to side pieces with white glue

3. Put glue in nail holes

4. Put nails in holes

Edging

You need to seal off the edges to help keep water out. I use gummed packing tape. You can look at this video from the Adaptive Design AssociationYouTube channel

Finishing

You need to apply primer, paint and polyurethane. You can look at these videos from the Adaptive Design AssociationYouTube channel