Raspberry Pi Buzzer (Controlled Via Web Browser)

by LimitOS in Circuits > Raspberry Pi

806 Views, 1 Favorites, 0 Comments

Raspberry Pi Buzzer (Controlled Via Web Browser)

What you'll be building

This tutorial teaches you how to turn an active buzzer that emits a high-frequency sound on and off via the internet.

Requirements

Raspberry Pi connected to the internet

Raspberry Pi OS (Buster)

Circuit materials: active buzzer, breadboard, wires

Set Up the Circuit

Connect the active buzzer to GPIO pin 4.

Run LimitOS on the Raspberry Pi

LimitOS runs alongside your existing operating system, and can be run via:

curl -sS https://limitos.com/run | bash

Follow the on-screen instructions to register the device afterwards.

Set Up the Device on the LimitOS Website

After registering your device, you'll be on the LimitOS website at https://limitos.com . From there, go to your device by clicking "My Devices" and selecting your device. Then add pin 4 as a digital output, and you can then click the "on" or "off" buttons on the website to turn the buzzer on or off.