RGB Human Circuit

by NoahT3 in Circuits > Arduino

2272 Views, 7 Favorites, 0 Comments

RGB Human Circuit

When you touch the leads on this circuit it flashes Red, Green, and Blue.

This Circuit was collaboratively built by Me and my Friend Cass.

Gather Your Parts

You will need:

Breadboard

Breadboard Wires

Arduino (needs 4 I/0 pins

NPN transistor

3 leds (red, green, blue) or and RGB led

3 560R Resistors

1 10k Resistor

Build Your Circuit

Program the Board

Here is the program:

int readPin = 10;
int ledR = 9; int ledG = 8; int ledB = 7;

void setup(){ pinMode(readPin, INPUT); pinMode(ledR, OUTPUT); pinMode(ledG, OUTPUT); pinMode(ledB, OUTPUT); }

void loop(){ while(!digitalRead(readPin)) { digitalWrite(ledR, HIGH); delay(50); digitalWrite(ledR, LOW); digitalWrite(ledG, HIGH); delay(50); digitalWrite(ledG, LOW); digitalWrite(ledB, HIGH); delay(50); digitalWrite(ledB, LOW); } }