R Direct Drive

by rxindela in Workshop > 3D Printing

535 Views, 3 Favorites, 0 Comments

R Direct Drive

The reason for this project is to combine E3DV6 hotend and the Orbiter extruder to create a small and lightweight direct driver.After more than two months of design and testing, it has the current appearance. The assembly is very simple.

Supplies

1 7 prints;

2 M3 X 6 Socket Head Cap(4);

3 M3 X 8 Socket Head Cap(2);

4 M3 X 10 Socket Head Cap(2);

5 M3 X 12 Socket Head Cap(4);

6 M3 X 16 Socket Head Cap(4);

7 M3 X 25 Socket Head Cap(4);

8 M3 X 30 Socket Head Cap(1);

9 M3 Hexagon nut(1);

10 M3 Knurled Brass Nut(M3X4X4.5mm)(16);

11 5015 fan;

12 3010 fan;

13 E3DV6 or E3DV6 CLONE or DRAGON or DRAGONFLY hotend;

14 the Orbiter V1.5 Extruder;

15 MGN12C Block;

Prepare the Bill of Materials

Prepare required materials according to the list provided.

Embed Nut on Print

The insert nut can be heated with a soldering iron, nut type: M3 Knurled Brass Nut (M3X4X4.5mm).

Install the 3010 Fan

3010 fan does not need screws.

Install E3DV6

Install the heating rod and thermistor on the E3DV6 first, and then fix it with M3X16.

Arrange the Wires

Arrange the wires one by one.

Install the MGN12C Block

Fix with M3X10 and M3X6 screws.

Install the Cooling Fan Duct

Fix with M3X12 screws.

Install the 5015 Fan

Fix with M3X30 screw.

Install the Belt

Fix with M3X25 screws.

Install Teflon Tubing

Teflon tube length is 74.5mm.

Install the Orbiter V1.5 Extruder

Fix with M3X8 screws.

Install 3dtouch or Bltouch

Fix with M3X6 and M3X12 screws.

Install the Harness Clip

Fix with M3X12 screws.