Pulse Sensor Using Inviot U1. Arduino Compatible Board
by InvIoT in Circuits > Arduino
829 Views, 1 Favorites, 0 Comments
Pulse Sensor Using Inviot U1. Arduino Compatible Board
Visit:
http://www.InvIoT.com/U1 for the U1 board, and for library download
and http://www.pulsesensor.com for the pulse sensor
Setup
Connect the sensor from pulsesensor.com to InvIoT.com/U1.
Connect FTDI to U1 and to the USB
Open Arduino IDE install the InvIoT U1 library.
Go to file/examples/InvIoT_U1/applications/pulseSensor
Upload sketch
Downloads
Done.
This is not for medical use! The code on the example is from pulsesensor.com and is modified for the U1 library.
You can use the WIFI ESP8266 that is on board of the U1, and send the pulse data over the internet to sites like