Pulley System

by Mercedesferrin in Workshop > Tools

514 Views, 1 Favorites, 0 Comments

Pulley System

These are the supplies needed for the pulley system lifted by a wheel and axel.

Downloads

Supplies

  • 4 Thumb Tacks
  • Dental Floss
  • 2 Different Sized Bottle Caps
  • Scissors
  • Lighter
  • Rock

Attach String to Rock

This part is easier with an uneven rock, I wrap it around several times then tie it off.

Put in 3/4 Thumb Tacks in the Wall It the Positioning You Want

Trim Bottle Caps (if Needed)

I had to trim/burn down the caps to fit the tack.

Add Holes to Both Caps

I heated up the plastic and used a thumb tack to punch the hole.

Stringing All of It Together

I threaded the string through the holes so that one cap would inside the other and the middle cap would be the anchor. For the end of the string i melted the cap and had the cap melt around the string.