Portable Dispenser

by fatur_tle in Circuits > Tools

428 Views, 1 Favorites, 0 Comments

Portable Dispenser

Portable dispenser is a series of tools heating once the tool cooler water that is multifunctional because it can be taken anytime and anywhere

Supplies

Ingredients:

1. 2 Bottles and Caps

2. Perltier TEC-12706 Module

3. 2 Heatsinks

4. Duct Tape

5. 2 Rings

6. Sling Bag

7. Female Cable

8. 2 Water Taps

9. Adaptor

10. Carton

Tools

1. Solder

2. Glue

3. Cutter

4. Marker

Make a Hole That Bottle for a Size Same As With Heatsink

Put Heatsink in the Hole That Make It and Glued on the Side by Side

Make a Hole for Size a Tap That on Side Was Different With Heatsink

Put the Tap in the Hole Which Has Made and Glue on the Side of the Tap

Create a Series Consisting of Perltier Module, Female Cable, and Adaptor

Clamp the Perltier Module Between 2 Heatsinks

Duct Tape the Bottle to Make It Stronger

Please Written for Different on the Side That Is Hot and Cold

Stick It a Ring on the Side of Up on the Bottle

Connect It With Sling Bag

Connect the Female Cable to Adaptor and the Adaptor to the Mains­­­­

Give a Water for Two Bottles Hold on 15-20 Minutes

Put a Cover Bottle As a Glass

Last, If the Water Already Hot and Cold Ready to Drink