Photogrammetry Pencil Sharpener

by Austin Pao in Workshop > 3D Printing

929 Views, 4 Favorites, 0 Comments

Photogrammetry Pencil Sharpener

3D printed shell pencil sharpener.

Supplies

Small pencil sharpener, seashells, lamp, phone camera, foam board, wooden dowels, 3D printer.

Find a Shell

Get a shell that has a decent amount of depth.

Setup a Clean Area for Photos

Set up a plain background that is white, grey, or black. I had the most success with a white background. For optimal results, take pictures in 5-degree increments, if done correctly you should end up with approximately 70 pictures.

Generate Mesh in Agisoft Metashape

Upload your images to Agisoft Metashape and generate your model.

Edit the Mesh

Make a mesh that conforms to the pencil sharpener of your choice and combine it with your shell mesh in Meshmixer.

3D Print and Assemble

Print all of your parts and assemble them using any strong plastic adhesive. I used hot glue but Epoxy would be better.

Sharpen a Pencil

Test out your new sharpener!