Phone Stand

This is just another very simple phone stand.

I was inspired by Wyaattt, blawn, and others, but needed to customize it for my thicker phone case.

This one has a slot opening of 13mm, and an overall size of a standard credit card.

It can be carried in a wallet or put on a key-chain.

1. Laser Cutter/Engraver
2. Material that can be cut with a laser cutter/engraver (I used 3mm Basswood)

1. Use attached .SVG file (created with Inkscape) and a laser cutter/engraver of your choice to cutout, or feel free to edit/redesign as desired.
2. Optional, you can personalized it by adding a graphic or text to engrave on the face of the design to make

1. Slip stand around the phone, with the long side in the back of the phone
2. Adjust height of the stand along the phone according to the angle you want while gently leaning the phone back until the tension between the phone the stand balance