PVC Light Saber

Today I will show you how to make a PVC light saber.

Things you will need:

at least 3 and a half feet of 1/2in pvc

1ft of "1in" pvc

pvc cutter

Red and silver paint

and electrical tape.

I cut the "1/2"in pvc at 39in, feel free to cut it at any length. (Just remember that the light saber starts a foot up)

Now is when you paint it! yay!!! go ahead and paint it your favorite lightsaber color.

Grab a foot of 1in pvc and cut a angle on one of the ends, then paint it grey.

Decorate your handle however you like.

Then wrap tape around one of the sides of the saber until the handle slides onto it and fits tightly.

I made two. After a while of fighting the paint will chip off and you will have to repaint.