Night Finder Mod

by sithlil in Outside > Launchers

2687 Views, 5 Favorites, 0 Comments

Night Finder Mod

here is a mod on how to make a double springed night finder with better o-rings.

items needed:
Night Finder
a 4-6kg load spring or one out of a buzz bee twin tek
o-rings
Vaseline or other lubricant(wd-40 etc.)
screwdriver

SPRINGS

now go ahead an take apart the gun.

you will need a screw that is the same length a the night finders, but preferably with less width. i used the one out of a buzz bee twin tek (you buy it in a two pack) i did this because it was broken.

place the BB spring (or whatever spring you have inside the NF and place to the side

O-Rings

Now to replace the o-rings

just follow the pictures.

you dont have to put 3 o-rings on it just worked well for me.

now lubricate the barrel

Re-assemble

now go ahead and re assemble. this mod should have at least doubled your range. it now shoots between 50-70ft(16-20meters flat. possibly more.