NB Roomba

by jas0n1ee in Circuits > Robots

1632 Views, 12 Favorites, 0 Comments

NB Roomba

So the project is to build a robot which can carry a camera and walk around. Roomba is cheap and easy to develop on it.

This is a Nvidia Jetson tx1 board. It has a GPU along with a powerful ARM chip on it. The greatest stuff here is this board only consumes 10W power.

I already opened up a Roomba, and try to mount this board on it. If you don't know how to open it, you can read this inversely.

Open It Up and Drill Holes

After removing the top&bottom cover, wheels, battery, bumper, motherboard. Here is what your Roomba should look like.

I drill four holes for the tx1 board, but if you got other boards, make sure you measure the right length before drilling anything.

Put Motherboard Back and Connect Pins

Put Front Pad and Screws Back

Connect Bumper Wire, Put Bumper Back

Put Top Cover and Screws Back

Put Wheels, Battery, and Back Cover Back to Its Place

Mark Useless Part and Cut It Away

I found out that the Tx1 board is actually larger than the circle shape of the Roomba after a while. So I decided to cut the dust bin open and live more space to the board.

The red line on the bin indicate the cutting line.

Prepare Power/Reset Button

As the power/reset button on the board is hidden inside the Roomba, I soldered wires to buttons and later mount it on the dustbin.

I should choose two different color to distinguish Power and Reset... 0_o

Put All Component Together

Add a Bottom Cover to Keep the Board Away From Dust

Now Write a Simple Face Detection Program on That. It Will Find and Follow the Largest Face LOL