Miniature Forest(Model)
I live in a semi urban area, where there's a fairly big forest nearby . so whenever I get some time off I go there and just enjoy the view of different types of trees and the sounds of the wilderness; chirping of birds, crumpling of dried leaves and so many other sounds all together creates a beautiful cacophony of noises, and also the different shades of green that keeps changing through the year. so I wanted to make something that connects me with that wilderness of the forest even when I am home, from there came the idea of making a small piece of the forest that captures that environment using art and designing.
Hope you will enjoy reading the process from designing to final rendition.
Supplies
MATERIALS:
Acrylic sheet or plexiglass (1.5' x2', 2mm thickness)
Plywood (1.5' x 2', 4mm thickness)
Strip light (green)
Fabric colors
Wood glue
Dry clay
Masking tape
Stick glue for paper
TOOLS:
Hand saw
Jigsaw
Drill machine
Jewelers saw
Jewelers bench pin
Marker
Exacto knife
Cutting mat
Printer
Graphics tablet
Steel scale
Paint brushes( different sizes)
SOFTWARE:
Fusion 360
Krita
Designing
I went through a lot of different ideas that includes the elements of forest but I couldn't decide what to make exactly. the things I was sure about was that it should include various shades of green and should be a small enough showpiece that doesn't take too much space at my desk.
A forest consists many different kinds of trees plants and bushes with various shapes and size , to show the variety of shapes I came up with the idea of layering; each layer having different shape and leaf pattern. First I thought of using paper sheets for different layers but then changed it to use plexiglass or acrylic sheet as I have not previously worked with acrylic sheet and wanted to try it out.
Although it draws elements from real forest it is a decorative piece , so I wanted to add another kick to it. Acrylic sheet kind of behaves like glass , when a light source is added on the edge of glass the light is refracted through all over the area so I thought of adding strip lights to use that glass like feature.
Finally after a bit of sketching I was sure how it should look like.
Visualization
Although I knew how it should look like i didn't knew how the different shapes and measurements would actually go together in reality, that's why I used fusion 360 to create the model.
First I created a base structure on which all the all the layers would be attached so i thought making slits through which i can slide the acrylic sheet layer and in the inner side of the slit I will attach strip lights which will light up the edges of the acrylic sheet.
After a bit of playing around with different measurements for the layers I came to a conclusion to make a total of 6 layers spaced differently to create a sense of perspective. The back layer should be the biggest in dimension, gradually getting smaller in front.
On top of the base structure where the layers would be attached vertically, I made slits of dimensions same as the thickness of the acrylic sheet so I could snugly fit the the layers on the top and the light source on the bottom.
After this initial model it was time to define the exact shape and color of the layers.
Drawing and Coloring
For drawing and coloring I would be using Krita. I decided there will be 6 layers and 5 different elements in the model. I will be creating them from the back to front order. There will be 3 different back ground elements and 2 distinct front elements, one of the two front element will be taking three layers to complete.( for better visualization refer Attachment) The naming will also be in the from back to front in this order. I decided I will use two shades of green in one tone for each elements keeping it simple and still using various shades.
Background elements:
Background 3: This will be farthest background element, that's why I wanted this layer to be the biggest element so it would set the depth and vastness of the forest. first i created a new image having dimensions 8" in width and 7" in height and resolution 500 pixels per inch so it would give a crisp quality print.
As this background is the farthest I drew a simple shape of two big grooves consisting an assimilation of the tallest trees. The farther the object is the details become obscure and shapes become simpler as we know . so I chose a really dark green tone and filled the shape then I selected a slight lighter green of that same green tone to define it more. I used a brush of about 20 pixels to paint grass like lines , The lines are random just leaving a slight distinction between the two grooves. and that's it , I didn't gave it more detailing as it woold be the most obscure background of the three.,
Background 2: As this background layer is nearer from viewpoint, the shape and details will a bit more conspicuous from the previous one but not so much. So first I created a new image with the dimensions of 8" in width and 5" in height and resolution of 500 pixels.
First I drew the overall shape of two big grooves outlining with some smooth curvy lines. Then picked a dark tone of green in the yellowish side for the base color unlike the previous layer which was on the blue side. Filled the shape with that color. Then chose a lighter shade of green of that same tone, then using the "shapes fill" brush from the brush menu created numerous leaflike shapes and filled the whole shape. I started painting the leaves from the base to the top gradually decreasing in size going up and also left a little gap two distinguish the groves and give more value to it, and its done. This background became slightly more detailed in comparison to the previous one.
Background 1: This background would be the most detailed one out of the three. Like the previous one, I started with creating a new image of the same dimension as background 2, but it will not obstruct the previous layer.
This time unlike the previous ones I first filled the whole canvas with the lighter green. I chose a green in the red side( or sap) for this layer. After filling the whole page I picked a darker shade of green in the same tone and selected a pen brush of about 20 pixels radius. Then started drawing long straight leaf like structures from the left bottom corner. After that I drew a single big plantation having long and round leaves in the middle focus. Then drew some other shapes of leaves for the bushes mostly containing the long straight leaves. This way filled whole lower region with bushes and a single unique paint the middle. Then I filled all the gaps that was created by the drawing to further enhance and give richness to the painting. And like the the background 1 is done. It is the most detailed background and doesn't obstruct the previous ones more that it should.
Front elements:
Tree 2: even though I am saying tree 1 it will be the same tree in consecutive layer. So I visualized this part as the branches and leaves of a tree that is slightly away from me, so I picked a dark green color on the blue side for the leaves and a dark brown tone for the trunk , then added leaf shapes further detailing it as its the front main element of the whole model.
Tree 1: Its the front part of the same tree as the previous one that is nearer to our view. It has a different element a the bottom of it which is a rock ,showing that this branch of the tree is coming just from behind a big rock. For the base color of the leaves I chose a light yellowish green and a lighter brown for the trunk. For the rock I picked a slight brownish grey further detailing with a light grey color showing the jaggedness of the rock.
Left rock: On the same layer as the tree 1 ( but it will be placed on the left side) I drew a small rock beside which some kind of shrub is growing , this shrub has some really big leaves and light green color. For the rock used the same grey tone as on the right side.
Rock 1: This rock is just the front side of the rock from the previous layer from which a tree is growing. I chose a lighter grey tone from the previous layer rock, further detailing it with ragged lines to show its rocky character.
For all the front elements I used a canvas of dimensions 4" in height and 5" in length. For all the right side elements I used the same canvas as it helped me visualize how to scale the elements so it looks good and proportionate.
For all these images I set the resolution of 500 pixels per inch so that I could get a crisp print resolution later on.
Refer the images above to know exactly which settings I used.
Cutting the Parts
Cutting the acrylic sheet: Before cutting the exact shapes of the elements first I cut rectangulars of dimensions that encapsulates the shapes. So it would be easier to handle smaller pieces instead of big.
Then I placed each printouts of the paintings under each of their specific rectangles and traced it using a marker.(while tracing make sure you are viewing it from the top side otherwise it might change slightly.)
After tracing on to the acrylic sheet was done I first started cutting the rectangles without going for the shapes from the get go, making sure the edges of the elements that would be attached to the base is straight otherwise I just cut to the closest of the outlines. For every straight cut I used a big hand saw, first placing the sheet then placed a straight edge plywood cutout on top of the glass so it distributes even pressure throughout the sheet and help cut straight. Also placed a piece of paper on both sides of the sheet so as not to scratch the surface with dust or any particle.
After cutting each elements in smaller pieces I started to cut outlines of the shapes using a jewelers saw and a makeshift jewelers pin which I made with a scrap piece of wood(and is really useful for cutting every nooks and cranny) but for some shapes like the background 1 element i didn't cut every leafy shapes from the start, first I cut closest I could reach with the saw and cut a rounded edge for the shapes, then after that i cut along the actual outlines.
Cutting the acrylic sheets having that kind of intricate shapes using jewelers saw was really hard and time consuming, I was not able to cut along the exact outlines and for some cases I couldn;t even reach the place where i want to cut even with a jewelers saw, like on the background 1 element I had to add extra leaf shapes.
Although it was not that bad and kind of succceded achieving the overall shapes of the elements.
After all the acrylic sheet I sanded the rugged edges with a 120gsm sand paper to giver smooth finish.
Cutting the base structure using plywood: For the base first I measured and marked the pieces according to the given dimensions of the four sides and a bottom then cut the shapes using jigsaw .
For the top part of the base where the layering elements will be attached I cut the slits carefully without breaking as the slits are really close. As the top part is separated into quite a few pieces I marked the each pieces to later remember the order in the joining step.
After that I sanded all the jagged edges of the cutouts using 80gsm sand paper.
All the cutting is done.
Assembling the Base
First I joined all the four sides of the base using wood glue then after drying I started attaching the top part from one side as it is separated into few pieces making sure the order is right. And also making sure it has uniform slit thickness in all the six places.
After joining and drying the glue it is time for placing the strip light inside the bottom open structure. but before that i made a 5mm hole on back side of the structure through which the strip light wire will come out.
I started attaching the strip light in the inside of the structure in a way so that the light comes outside through the slits. I used masking tape for attaching which is enough to hold the light . I attached the strip light from the front slits to the back slit leaving a certain length of light for smooth transition from one slit corner to other. Finally when all the slit length is covered i cut the strip light in its designated cutting place and put the other end through the back side hole of the structure. i had to use an adapter from dc to ac for the strip light.
After that I attached the bottom plywood cutout using glue.
Preparing the Elements for the Layers
After cutting all the elements for the layers it was time to add the greenery to the not so defined shapes.
First I printed out all the images created earlier on photo quality paper. Then I cut along the outlines of the images to fit it on the acrylic sheet shapes using exacto knife. Keeping careful attention when cutting intricate and tricky corners so as not to cut off the thin places.
As I mentioned earlier in the cutting step that for the background 1 i had to create some new leaf shapes as i couldn't reach those corners that's why i retraced the shape but using the acrylic sheet shape on top of the print out image, so that i could fill those new leaf spaces with same color tone. And then cut the printout to the new shape.
After cutting the printout images was done I glued the images on their respective acrylic sheet shape so that the acrylic sheet is on the front side of the printout image. So I had to use a glue that doesn't leave any visible residue in between the surfaces. and i kind of messed up that part when I used an instant glue which kind of worked at first but then became whitened a little bit as you can see on left rock part. Later I used a stick glue for paper which worked like charm, it didn't leave any residue and stuck the two surfaces really strongly.
And the elements are done finally.
P.S: A Failed Step: at first I had actually decided to paint on the acrylic sheet elements using the graphics image as reference and using fabric colors . I managed to get the color right for the background 3 and it also looked good just like the picture when placed on the floor or surface but when I place it vertically all the brush strokes became visible even though the consistency of the paint was homogenous. all the light and dark tone got mixed up in the fraction of light, that's why I decided to change my approach.
Finalizing
Before finalizing first I checked if i am able to slide the acrylic sheet elements into their designated slits, and if its a snug fit or not. After being satisfied with the results, I marked the extra length of the front three slits where the strip lights are kind of exposed and doesn't cover any of the acrylic sheet. I filled those extra slit lengths with dry clay.
After the clay dried I created a earthy greenish color mixing sap green, brown and orange to paint all over the base structure creating a finished look for the model.
NOW PLUG THE CORD, ON THE SWITCH AND SEE THE MAGIC HAPPENING.
It was really a fun project where i got to do something new , hope you will enjoy reading the instructable.