Metallic Mini Pokemon Cloyster

by sid.gorey in Craft > Reuse

325 Views, 2 Favorites, 0 Comments

Metallic Mini Pokemon Cloyster

I chose to create this piece of Cloyster because of the similarity in human behavior to a Cloyster, I am not about to throw an Ice Beam but rather, humans are prone to close-up and open-up randomly.

And the metal part was required because of the heaviness and the luster and shine of the Pokemon is reflected and it can be used as a cool paper-weight or a show-piece.

I have used metal bottle caps, and spare parts like nuts and bolts and a decorative ball to create this shape.

Supplies

  1. Bottle - caps = 4, they should be metallic (ideally coke bottle cap) in order to have that frill-shape at the edges.
  2. Paint = Violet, Blue, Black.
  3. Paper pieces = draw eyes and mouth with a pen.
  4. Newspaper for protection of surfaces from paint.
  5. Gloss Varnish = That shine for better visibility.
  6. Nuts and bolts = I have used 1 large nut which is attached above the face, 2 medium sized nuts, 2 small bolts and 2 small-sized nuts.
  7. Decorative Ball = I have used a small decorative ball for the face.
  8. Strong glue = I have used a Fevikwik.
  9. Reference image of cloyster from Google

Attach the Ball in Between the Two Caps

  1. Attach the ball with glue in between the two caps as well as a nut in right above the face.

Attach the Other Two Caps for a Second Layer.

  1. Glue the second layer of bottle caps to the outer surface of first layer.

Attach Spikes.

  1. Glue the screws and bolts to the outer side of the outer layer in the shape of Cloyster. Refer Cloyster image from Google.
  2. I have attached the two large ones at the upper sides, the small ones on the bottom corners and the bolts in between.

Paint!

  1. The face is in black color.
  2. All the outer covering including spikes are in blue-violet color.

Go Cloyster!

Use Ice Beam on Charizard!