MakeBlock Motorized Camera Slider

by KiteArmy in Circuits > Cameras

4819 Views, 66 Favorites, 0 Comments

MakeBlock Motorized Camera Slider

Hey Everyone. I have been pining over motorized camera sliders for over a year now. Most sliders online cost over $1000. I just happened to chance upon this Makeblock option and took the plunge. Building the kit was a blast BUT instructions with the kit and online are none existent. So I figured I would share my journey with the world...HERE IT IS.

Tools

Order kit at: http://www.makeblock.com/activity/camera-slider-ro...

I got my delivered for under $200 so you may have to wait for a sale.

TOOLS:

A small allen key is probably the only tool that you may have to look around for, everything else is standard tool box fare.

Connect Feet

Connect feet to slider bar

Build Carriage

Insert nuts into frame and install stand-offs

Mount Motor

Mount the motor and install the drive belt

Pat Yourself on the Back

Construction should be all done. Tidy up the project and cable tie wires.

Program This Bad Boy

Ok...so this is probably the most challenging part. Download the software from MakeBlock called Mblock. Install and connect your MegaPi. It is a breeze to visually program. Take a look at what I used for a starting point.

That's it...Enjoy