Make It Fold: Rivian R1S

by CADKai in Craft > Paper

1123 Views, 5 Favorites, 0 Comments

Make It Fold: Rivian R1S

One day I was scrolling through the internet and found a picture of origami Rivian R1S that were given out at a Rivian service location grand opening. I really wanted to have one and didn't know where I could get one. So, I created my own by contacting a friend who had one and using a picture of it unfolded to create a printable version that I could use to make my own.

Supplies

  1. Printer
  2. Scissors
  3. Tape

Print Out the PDF

First, print out the PDF below.

Cut It Out

Then, cut out the foldable. Cut around everything that is inside the pink, as shown above.

Cut Out the Wheels and Front

You also need to cut out some additional parts to make it fold properly. Cut out the bottom of the wheels as shown above, and the front of the car.

Fold It Into a Rectangle

Then, fold the car into a rectangular shape, as shown above.

Fold the Front and Rear Flaps Into Place

Finally, fold the front and rear into the small slits that you cut out earlier. There you have it! Your very own origami Rivian R1S.