Linkit ONE Basics: Countdown

by sdsd4 in Circuits > Arduino

480 Views, 1 Favorites, 0 Comments

Linkit ONE Basics: Countdown

Countdown

Materials

Linkit ONE

7-segment LED

330ohm Resistors x7

Wire

NPL Transistor

Breadboard

Step 1 : Let's Begin

Start by placing the resistors . For this project you will need 7 resistors. Place them according to the example of mine.

Step 2

Now place the 7-segment LED. Follow the picture above. After that begin to add the wire to the bread board. There are two wires that start and end on the breadboard . Start with those wires and move on

Step 3: Linkit ONE

Take 4 more wires and place them like in the picture. It helps if they are all the same color.In between those wires place 3 more so that it looks like this.The Last wire goes at the bottom of the board and it is by itselg

Step 4

Now connect the breadboard and the Linkit ONE.

Step 5 :coding

This is what the final product looks likes. Now you should download This and upload it to the Linkit ONE via USB cable

Finish

The finish product will count down one second at a time. Any questions? Leave a comment. Thanks