Lily With a Butterfly
This document is to show you a step by step of how to make a lily with a butterfly in 3d form.
Stem of the Lily
Step 1- You make a circle and make it 0.40 and you extrude the circle however you want but I made it 5 inches.
A Holder for the Flower
Step 2 - Make this shape on top of the circle and extruded it by 0.20
Plane to Start the Petal
Step 3- Create a plane and make the distance from the stem (extruded circle) 2.60.
Forming the Petal
Step 4 - Use a sweep to make this shape and it will be the base of your petal. It will look like a square but in the next step you will make the actual petal shape.
Final Shape of Petal
Step 5 - From the shape that you just made, create this shape on the front and it will be the final shape of your petal.
Dimensions to Your First Petal
Step 6 - after making your first petal, make another plane, but this time to the front plane. The plane will have a distance of 2.80 from the trapezoid.
Shaping the Petal
Step 7 - The petal you make you this shape using two arcs making it like a petal shape.
Cutting to Make the Petal
Step 8 - Using the cut extrude, cut out the pieces you don’t need. The second pictrure is how it should look after the cuts are taken off.
Flower Formed
Step 9 - After making the petal the way you like make a circular pattern. I made 7 petals but do as many as you want. The second picture is how your flower should look like.
Making the Pistil
Step 10- Make and line on the trapezoid and use the sweep tool. The last picture is how you make the base of the pistil inside the lily.
The Tip to the Pistil
Step 11- On the sweep you just made make the shape in the first picture then revolve it. It should look like the second picture.
4 Pistils
Step 12- Make a circular pattern and add 4 of them to make it look like mine. The second picture is how it should look like when you have all the petals and the pistil inside the lily.
The Plane to Start the Butterfly
Step 13- Make another plane, the distance from the bottom to the top of the lily should be 7.29.
Body of Butterfly
Step 14- With the plane you just made make a line and make six arcs like shown in the picture. They will be the body of the butterfly. You are going to revolve it, and it should look like the second picture.
The Final Step of the Butterfly
Step 15- Make a sketch with the body you just made, and you are going to be making the wings. The wings are made with a spline tool. Make them however you would like. The butterfly will look like in the second picture. That is the last step now you have a lily with a butterfly.