Lightsaber

by ericr141234 in Circuits > Lasers

5791 Views, 16 Favorites, 0 Comments

Lightsaber

Our group created a lightsaber made out of a flashlight, gel and a florescent light cover. 

Supplies

These are the supplies we used

We took the flashlight and drilled off the plastic cover. 

We hot glued the plastic tube onto the flashlight.

After the light cover was attached we made the tube shorter by cutting it. 

We used this red material (gel) and put it in the tube so the light projected a red color

We then painted the flashlight part making to make the handle realistic.

This is our final result