Lich Mask From Adventure Time
Like many, I grew up watching adventure time. I always liked The Lich's character design, because it was always cool and creepy to me. I knew it would be perfect for me to make a mask of him for Halloween because of his creepiness in the show.
Supplies
For this mask you will need:
- A blank, white human-face mask
- A nail file/block, sanding paper would work fine
- Modeling foam
- Black art pens, I provided the specific ones I used
- A set of acrylic paint, you will likely need most of the colors of the rainbow, I also provided the specific sets I used
- Mod Podge or any paint sealant of your choice.
Sanding the Mask
First, you have to sand the mask down in order for everything to stick. I sanded it down until the shine was dulled, and that worked well for me.
Cutting Out the Nose
Next, you want to cut the tip of the nose off of the mask, so the Lich can have his skeletal appearance later when we form it with the modeling foam.
Filling in the Mouth and Forming the Nose
Next, you want to take the modeling form and fill the mouth hole, as well as form the skeleton nose.
- A tip for working with modeling foam: I dipped my fingers and small pieces of the foam in water in order to make everything smooth.
Making the Eyes
After filling in the mouth and forming the nose, you want to make the Lich's sunken eyes! Make little snakes out of the foam, connect the ends, and place them evenly around each of the pre-made eye holes.
Making the Teeth
Next, you want to make the Lich's teeth. I formed each one of the teeth, connected them, and placed them where I wanted them to be, which happened to be where the base mask's mouth was before I filled it with modeling foam.
Making the Skin
After the teeth come the Lich's "skin" (or a showing of a lack thereof.) I wanted to make it look like it was flowing rather than just tattered, so I gave it a little bit of a direction. Make sure to point and contort the edges to give this effect.
Priming the Mask
Next, I painted the whole mask with white acrylic paint to make everything the same shade and prime the mask for painting.
Painting the Mouth
My next step was to paint the mouth portion of the Lich red.
- Tip: If I were to do this again, I would definitely start with painting the Lich's grey skin before anything else (after priming, of course.) It makes the process of cleaning up much easier.
Painting the Eyes
Next, I painted the black part of the eyes to prepare for the pupils.
- Tip: Again, like the last step, I would start with the skin before anything else.
Painting and Shading the Skin
Next, I painted and shaded the skin to give the effect of super sunken eyes.
Making the Pupils and Shading the Teeth
Next, painted the pupils and shaded the teeth and mouth.
Final Details and Sealing
Finally, I gave the Lich some cartoonish lines and covered it in Mod Podge.
There you have it! I hope you "fall" in love with making this cool Lich mask!