Less Materials Pocket Tissues Case

by masamasa in Craft > Leather

828 Views, 5 Favorites, 0 Comments

Less Materials Pocket Tissues Case

This pocket tissue case is made from a rectangle leather, and I introduce the way to make less tools.

My text should be difficult for understand , ask me on "easy English" (but convert into "inch" yourself).

Tools/Materials

1.Tools

These are a minimum of tools for me. Add another ones as you like.

  • Cutter knife
  • Stitching Awl
  • Corky mat
  • Needles

2. Materials

  • Leather

I use 1.5mm. The thicker leather may be unsuitable. The size required is 25cm x 12.5cm.

  • Thread

I use leather sewing yarn because it was inexpensive. Use your thread you have.

Pattern

This pattern was draw on the Japanese pocket tissue size (12cm x 8cm), so you have to adjust by your pocket tissues.

  • Big Rectangle

The size is 25cm x 12.5cm. Other parts are cut out of this Big one.

  • Small Boxes

Two boxes size is 4.5cm x 4cm. Mid rectangle size is 7cm x 3cm. It is better to take the gaps in boxes because the work will be strong.

Attach the Side Parts

Cut out the two boxes(4.5cm x 4cm) from Big rectangle.

Stitch the parts on hems like second images.

Make Toggle

  • Cut out the small rectangle(7cm x 3cm) from center of big rectangle.
  • I made the toggle by looking at below video.

YouTube(Japanese voice)

  • Cut the small rectangle like second image.
  • Roll the parts like third image. I didn't use punches, I use slit with cutter to pass the line.
    • Passing the line through the slit is tight , so take slit width long or use something like needles.

This toggle is small, so thick leathers may be unfit.

Attach the Side Parts

Attach the side parts on other hem.

This part was most difficult for me because main body has been cumber for sewing.

Attach the Toggle

  • Attach the toggle on the body like first image.
  • Slit on the body as the toggle button hole. It is enough to make slit shorter than the toggle width.

Pack Some Tissues

That's it, try to pack tissues your work.

If you have any questions/comments about this Instructable (it's my first one) or the process, comment below.

Additionally, this instructable is being made as an entry to the Leather Contest. If you liked it, I would greatly appreciate it if you could take a moment to go over to the contest and show your appreciation with a vote.

Thanks,

masamasa